Tools

Build and send a customer quote — manually or by voice.

Create and send an invoice for payment.

Electrical Installation Condition Report — inspect and test an existing installation.

Electrical Installation Certificate — certify new work or an addition.

Minor Electrical Installation Works Certificate for a single-circuit job.

Portable appliance inspection & test report — appliance register with pass/fail.

Fire detection & alarm system certificate — design/install/commission/periodic.

Emergency lighting completion & periodic inspection certificate.

EV charging installation certificate (BS 7671 + IET Code of Practice).

Solar photovoltaic installation certificate — DC string tests, inverter, MCS & DNO refs.

Electrical energy storage system certificate — capacity, chemistry, location & protection.

Notify the DNO of a generator / storage connection under EREC G98 / G99.

R1+R2 & ring-final continuity, insulation resistance, polarity, Zs, Ze, PFC, RCD trip time, earth-electrode, functional — fill by voice, export to Excel.

Design current + correction factors (grouping · ambient · insulation) → cable CSA.

mV/A/m × length × current → voltage-drop % against the limit.

Max permitted earth-loop impedance for a device type + rating (compare to measured).

√(I²t) ÷ k → minimum CPC size for the fault current.

Cable cross-section against the containment space factor.

Connected load × diversity → assessed maximum demand.

Expected R1+R2 from conductor size + length to sanity-check test results.

Max permitted disconnection times for an RCD type at IΔn.

Lumen method: lux × area ÷ (lumens × UF × MF) → fittings + spacing.

Risk assessment + method statement pack — fill a standard electrical template and save it as a PDF.